Od 43 170 EUR
TECHNO JETCORD 170, 190
| Technical parameters | |
|---|---|
| Weft insertion main nozzles, auxiliary nozzles, profile reed, stretch nozzles | |
| Processed textile materials tyre cord, polyamide, viscose, polyester | |
| Warp materials range | 100 - 184 x 2 tex |
| Weft materials range | 10 - 100 tex (200 tex) |
| Take-up regulator range | 0,6 10 weft/cm |
| No. of weft measuring devices | electronic 2 - 3 feeders |
| Insertion control | electronic control |
| Control system | industrial computer systém |
| Required air pressure in the distribution | 0,8 Mpa |
| Total power consumption 5,5 kW main motor + 1,3 kW take-up regulator + 1,3 kW warp regulator + 1,3 kW batching motion | |
| Weft insertion rate 600 - 800 picks/min, acc. to the processed fabric type | |
| Weaving width | 170, 190 cm |
| Maximum reduction | max. 60 cm |
| Shedding motion | cam motion (up to 8 shafts) |
| Selvage motion tuck-in device, air or mechanical | |
| Warp regulator | electronic |
| Take-up regulator | electronic |
| Automatic pick remover | Optional |
| Central greasing | Optional |
| Batching motion max. batching diameter 1650 mm | |
| Special additional equipment automatic pick remover, central greasing | |
| Machine height | 1800 mm |
| Machine width
4100 mm (170 cm) 4300 mm (190 cm) | |
| Note High level parameters can be achieved provided that suitable yarn, weave and technological preparation are used | |
| Warp beam not used, warp ends fed from the bobbin creels | |
| Depth 2550 mm without batching unit and creel | |
| Machine output in weft meters | 1520 m/min |