Od 24 504 EUR
CZECHO Basic CT - cotton
CZECHO Basic FT - filament
| Technical parameters | |
|---|---|
| Weft insertion main nozzles, auxiliary nozzles, profile reed | |
| Weight of fabric all fabrics normally woven on air jet looms up to 500 g/m² | |
| Processed textile materials | staple, filament |
| Warp materials range spun yarn: 10 - 110 tex (60-5,3Ne) filament yarn: 44 - 470 dtex (40-430den) | |
| Weft materials range spun yarn: 10 - 110 tex (60-5,3Ne) filament yarn: 68 - 340 dtex (62-320den) | |
| Take-up regulator range Standart: 3,7 - 36,6 wefts/cm Optional: 1,8 - 18,3 wefts/cm or 7,5 - 74,5 wefts/cm | |
| No. of weft measuring devices | 1, 2 |
| Insertion control | electromechanical |
| Control system | processor |
| Required air pressure in the distribution | 0,7 Mpa |
| Total power consumption 4 kW main motor + 0,45 kW ventilator | |
| Machine output in weft meters (width 150cm) | 900 m/min |
| Machine output in weft meters (width 170cm) | 1020 m/min |
| Machine output in weft meters (width 190cm) | 1140 m/min |
| Machine output in weft meters (width 240cm) | 1320 m/min |
| Machine output in weft meters (width 280cm) | 1540 m/min |
| Weft insertion rate to 600 weft/min (width 150, 170, 190 cm) to 550 weft/min (width 240 cm, 280 cm) | |
| Weaving width | 170, 190, 240 cm |
| Maximum reduction | max. 60 cm |
| Shedding motion crank up to 6 shafts cam up to 8 shafts | |
| Selvage motion | rotary tuck-in device |
| Warp regulator | mechanical |
| Take-up regulator | mechanical |
| Automatic pick remover | no |
| Central greasing | no |
| Warp beam | 800 mm |
| Max. diameter of fabric winding in loom | 500 mm |
| Batching motion | Optional |
| Special additional equipment stretch nozzle, warp beam 900 mm and 1000 mm, double weft feeler, central cutting, selvages melting-off, batching miton | |
| Machine height | 1860 mm |
| Machine width
4115 mm (150 cm) 4315 mm (170 cm) 4515 mm (190 cm) 5015 mm (240 cm) 5415 mm (280 cm) | |
| Depth (warp bean 800mm) | 1860 mm |
| Note High level parameters can be achieved provided that suitable yarn, weave and technological preparation are used | |